Below you will find an in depth video installation guide for replacing filters for the AquaYouth 2.0 shower filter.

Step 1: Detach filter housing and the old filter cartridge

Remove the filter housing by turning it counter-clockwise, once the housing is removed, then pull out the old filter.

Step 2: Insert new filter cartridge & reattach housing

Insert new filter cartridge into the shower filter and make sure it's pushed in all the way. Then reattach the filter housing.

Step 3: Flush for 2 minutes to remove fine dust from new filter.

Run the water for 2 minutes to flush fine dust. Then you're ready to shower.

Congratulations, the installation is complete.